AEG HG795440XB - Manual (Page 17)

Problem Possible cause Remedy
The flame is blow out immedi-
ately after ignition
• Thermocouple is not heated
sufficient
• After lightning the flame,
keep the knob pushed for
approximately 5 seconds.
The gas ring burns unevenly • Burner crown is blocked
with food residues
• Make sure that the injector
is not blocked and the burn-
er crown is clear of food
particles.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a
solution to the problem yourself, speak your dealer or the local Service Force Centre.
If you operated the appliance incorrectly, or the installation was not carried out by a regis-
tered engineer, the visit from the customer service technician or dealer may not take place
free of charge, even during the warranty period.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
MOD.
PROD.NO.
SER.NO
DATA MOD.
PROD.NO.
SER.NO
DATA
MODEL MODEL
MOD.
PROD.NO.
SER.NO.
03 IT
MADE IN ITALY
TYPE
230V-50Hz
IP20 0049
1 2 3
1
Stick it on Guarantee Card and send this part
2
Stick it on Guarantee Card and keep this part
3
Stick it on instruction booklet
These data are necessary to help you quickly and correctly. These data are available on
the supplied rating plate.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are available at Service Force Centre and approved
spare parts shops.
What to do if… 17