AEG NC4003020M - Manual (Page 17)

9. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
• Clean the front of the appliance with a
soft cloth with warm water and clean-
ing agent.
• To clean metal surfaces use a usual
cleaning agent
• Clean the oven interior after each use.
Thus you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all oven accessories (with a soft
cloth with warm water and cleaning
agent) after each use and let them dry.
• If you have nonstick accessories, do
not clean them using an aggressive
agents, sharp edged objects or dish-
washer. It can destroy nonstick coat-
ing!
Stainless steel or aluminium ap-
pliances:
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions
9.1 Catalytic walls
The walls with a catalytic coating are
self-cleaning. They absorb fat which col-
lects on walls while the oven operates.
To support this self-cleaning process
heat the oven without any food
regularly:
1. Open the oven door.
2. Remove all accessories from the
oven.
3. Close the door.
4. Set the maximum oven temperature
and let the oven operate for 1 hour.
5. Clean the oven cavity with a soft and
damp sponge.
CAUTION!
Do not attempt to clean catalytic
surfaces with oven sprays, abra-
sive cleaners, soap or other
cleaning agents. This may dam-
age the catalytic surface.
Discolouration of the catalytic
surface has no effect on catalytic
properties.
9.2 Shelf supports
Removing the shelf supports
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
ENGLISH
17