4installing your phone – AEG Solo 15 User Manual

Page 4

Advertising
background image

3

3.2

Handset & Base Connection

• When purchased, all handsets are already registered to the base unit and should link to it when they are

all powered up.

• To use your cordless handset and base unit together, you must be able to establish a radio link between

them. The signal between the handset and the base unit is in accordance with the normal standards for
a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. Be aware that:

>Large metal objects, such as refrigerators, mirrors or filing cabinets, between the handset and the base

unit may block the radio signal.

>Solid structures, such as walls, may reduce the signal strength.

>Electrical equipment may cause interference and/or affect the range.

• Do not place the base unit close to another telephone, TV or audio equipment - it may cause interference.
• Putting the base unit as high as possible ensures the best signal.
• Out of Range warning. If you hear a warning tone during a call, and/or the sound in the earpiece becomes

faint or distorted, you may be going out of range of the base unit. Move nearer to the base unit within
20 seconds; otherwise the line may be cut off.

4

InSTALLInG YOUR PHOnE

4.1

Connecting the Base Station (See P4)

• Plug the mains power cable (16) and telephone line cord (15) into the base station.
• Plug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power socket, and the telephone line cord

into a telephone line socket.

• Always use the cables provided in the box.

Warning:
Use only the supplied adaptor. Using other power cables may damage the unit.

Warning:
Place the base unit within easy reach of the mains power socket. never try to lengthen the mains power
cable.

Note:
The base station must be plugged into the mains power at all times.

4.2

Installing and Charging the Rechargeable Batteries (See P5)

• Insert the 2 supplied batteries into the battery compartment, observing the correct polarity (see marking

inside battery compartment).

• Align the back cover tabs with the notches located at the edges of the exposed back panel and press

down to snap into place.

• Place the handset on the base and charge for 15 hours before using the handset for the first time.

>The handset will give a beep when it is properly placed on the base or charger.

>The battery charging indicator on the base or charger lights up in Red to indicate charging.

Warning:
Use only the supplied niMH rechargeable batteries.

Note:
The handset may become warm when the batteries are being charged or during prolonged periods of
use. This is normal and does not indicate a fault.

CAUTION
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

Advertising
This manual is related to the following products: