AEG Solo 15 User Manual

Page 6

Advertising
background image

5

5.2

Display Icons and Symbols (SeeP2)

Icon

Meaning

Displays when the battery is almost empty

Displays when the battery is fully charged.
Blinks when the battery level is low.
Displays when the line is in use.
Blinks when there is an incoming call.
Displays when you have new voicemail messages*.

Displays when you have new missed calls, or the call log is being viewed.

Displays when the phonebook is accessed.

Displays when the alarm is set.

Displays when handset ringer is turned off.

Displays when the handset is registered and within range of the base station.
Blinks when the handset is out of range or is searching for a base.
Displays when the answering machine is on.
Flashes slowly when there are new answering machine message(s).
Displays when the handset is in speaker mode.

Turns on when confirmation of selection or programming is available.

Turns on during phonebook editing mode to delete the last digit.
Turns on during menu mode when you can return to the previous state or previous step.

*You must subscribe to Voicemail service or Caller ID from your network providers for this feature to work.
You may need to pay a subscription fee.

5.3

Base Unit (See P3)

#

Icon

Meaning

12

Lights up in Green when the answering machine is on.
Flashes if there are new messages and flashes rapidly if memory is full (Only Solo15)

13

Lights up in Red to indicate charging

14

Press to find/page all registered handsets. Press the button again, or any key on the
handset to turn off the page signal. Press and hold to start registration process.

5.4

Menu Map and Menu Navigation

• From the home screen, press

to access “PHONEBOOK”, the first option in the Main Menu list.

• Press or to go to other options in the menu list.
• Press

to enter a sub-menu or function.

• Press

to go back to the previous level.

• Press to cancel the current operation and return to the home screen.

Note:
If you do not press any key on the handset for 15 seconds, the display will automatically return to standby.

Advertising
This manual is related to the following products: