AEG HK614010BB - Manual (Page 10)

Automatic Heat Up
1
2
3
4
5
6
7
8
9
10
11
12
13
14
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
MIN.
TEM.
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustra-
tion), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1. Touch ( comes on in the display).
2. Immediately touch the necessary heat setting. After 3 seconds comes on in the
display.
To stop the function change the heat setting.
STOP+GO
The function sets all cooking zones that operate to the lowest heat setting ( ).
When operates, you cannot change the heat setting.
The function does not stop the timer function.
•
To activate this function touch . The symbol comes on.
• To deactivate this function touch . The heat setting that you set before comes on.
Timer
Count Down Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
•
To set the cooking zone: touch again and again until the indicator of a necessary
cooking zone comes on.
• To activate the Count Down Timer: touch of the timer to set the time ( 00 - 99
minutes). When the indicator of the cooking zone start to flash slow, the time counts
down.
• To see the remaining time: set the cooking zone with . The indicator of the cook-
ing zone starts to quickly. The display shows the remaining time.
10 Operating instructions