What to do if – AEG HK614010BB User Manual

Page 14

Advertising
background image

To remove the dirt:
1. –

Remove immediately: melted plastic, plastic foil, and food with sugar. If not, the

dirt can cause damage to the appliance. Use a special scraper for the glass . Put

the scraper on the glass surface at an acute angle and move the blade on the surface .

Remove after the appliance is sufficiently cool: limescale rings , water rings, fat

stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic

or stainless steel.

2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.

WHAT TO DO IF…

Problem

Possible cause and remedy

You cannot activate the appli-

ance or operate it.

• Activate the appliance again and set the heat setting in 10

seconds.

• The child safety device or operates. Deactivate child safe-

ty device or

. See the section “Child safety device” or

"Stop and go".

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• There is water or fat stains on the control panel. Clean the

control panel

A sound operates when the ap-

pliance is deactivated.

You put something on one or more sensor fields. Remove the

object from the sensor fields.

The residual heat indicator

does not come on.

The cooking zone is not hot because it operated only for a

short time. If the cooking zone must be hot, speak to the serv-

ice centre.

You cannot activate the outer

rings.

Activate the inner ring first.

A sound operates and appli-

ance starts and stops again. Af-

ter 5 seconds one more sound

operates.

You put something on the . Remove the object from the

sensor field.

comes on

The Automatic Switch Off operates. deactivate the appliance

and activate it again.

and number come on.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some

time. Disconnect the fuse from the electrical system of the
house. Connect again. If comes on again, speak to the serv-

ice centre.

There is no signal when you

touch the panel sensor field.

The sound is deactivated.

Activate the sounds.

14

What to do if…

Advertising