AEG X66453BV0 - Manual (Page 18)

INSTALLING THE COOKER HOOD 18
Hood body mounting
• Open the top suction panel and fasten it to the hood body
on the left using the pin, so that it does not close again.
• Unlock the lower suction panel by removing the fixing pin
on the left, and open it.
• Remove the Metal grease filters using the handles provi-
ded.
• Adjust the two screws Vr, in the brackets 11a, so that they
are at the start of their travel.
• Hook the hood body to the two brackets 11a.
• From the inside of the hood body, turn screws Vr to level
the hood body itself.
• Fasten the safety screws 11.
• Close the suction panels.
INSTALLATION INSTRUCTIONS
��
��
���