AEG Voxtel D200 - Manual (Page 37)

37
UK
12 TROUBLESHOOTING
Problem Causes Solutions
No dialling tone when
pressing
t
The connection cord of
the base station is not
plugged in.
t
The adapter cord is not
plugged in correctly in
the base station.
t
Another handset is
using the base to make
a call.
t
Wrong telephone line
cord.
t
Check the
connections. Unplug
and plug back in the
mains. Check that the
telephone cord has
been plugged into the
base station and the
phone socket.
t
Check the base station
plug and the 230V plug
(remove and plug-in).
t
Wait until the line is
unoccupied.
t
Use the original
telephone line cord
supplied
When connect to a
PBX, no and/or wrong
connection after dialling. Dialling prefix is needed. Insert the dialling prefix.
“SEARCHING“ is
displayed.
t
Base station out of
range.
t
Base station not
connected to mains.
Reduce the range.
Connect base station to
mains.
The call does not work. Service not activated or
wrong setting. Check your Subscription
with the network.
No Display Empty Battery Recharge Battery
Answering Machine
The unit does not record
new messages. The answering machine
is turned off. Turn on the answering
machine.