AEG Voxtel S120 - Manual (Page 16)

16
t
Press and
/ to select “DEL ALL“.
t
Press
OK
to confirm.
t
Press
OK
to confirm again.
7.12 Find the handset
You can locate the handset by pressing the find key on the base station.
All the handsets registered to the base will produce the paging tone and
show “PAGING” on the screen.
You can stop the paging by pressing , or on any handset or on
the base again.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.13 Make an internal call
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls from
one handset to another handset and make conference calls. If the called
handset is not answered within 60 seconds, the called handset will stop
ringing and the calling handset will return to standby mode.
Note:
If only one handset is registered to the base station, press will display
“FAILED”.
7.13.1 Intercom another handset
t
In idle mode, press
and the registered handsets will display except
the calling handset.
t
Enter the desired handset number to intercom with.
t
The called handset rings. Press on the called handset to establish the
internal call.
Note:
If two handsets are registered to the base station, press will connect
to another handset immediately.
7.13.2 Call all handsets
t
In idle mode, press
and the registered handsets will display.
t
Press 9 to ring to all registered handsets.