AEG KM4400 - Manual (Page 23)

23
D
GR
NL
F
GB
Getting started
1. Before using the appliance
for the first time: Unplug the
appliance. Wash all the accessories
by hand in warm soapy water or in
the dishwasher.
(The accessories are dishwasher-
proof, except for the Wire whip.)
Clean the motor unit with a damp
cloth.
Caution: Never immerse the
motor unit in water!
Let all parts dry thoroughly.
GB
3. Move Speed selector to “OFF”.
Place the Stainless steel bowl on
the bowl clamping plate. Move
the bowl clockwise to lock into
position.
Warning: Never operate the
appliance with the attachments
wire whip, flat beater or dough
hook unless the bowl is in place.
5. Tilting the Motor head down:
Move the Tilt head locking lever to
“Unlocked” with one hand, tilt the
Motor head down with the other
hand. Insert the plug in the main
socket.
4. Place an attachment on the
Attachment shaft: Align the slot at
the top of the attachment with the
pin on the Attachment shaft. Push
attachment up and turn it counter-
clockwise until the pin is locked into
position. To remove attachment,
move it clockwise and pull off.
2. Place the appliance on a flat surface.
Tilting the Motor head up: Move the
Tilt head locking lever to “Unlocked”
with one hand, tilt the Motor head
up with the other hand. Once in up
position it locks. Warning: Keep
fingers and hands away from areas
with movable parts.
6. Move the Speed selector from
“OFF” to desired speed (1-10).
Once mixing is complete, turn the
Speed selector to “OFF” and unplug
the appliance.