Avaya Cajun P882 - Manual (Page 168)

5-16
Chapter 5
Cajun P550/P880/P882 Switch User Guide
Figure 5-3. Detailed Port Configuration Window
6. Enter a port name in the Name field.
7. Select one of the following options from the Category field
pull-down menu:
User Port - if this is an end-station port
Service Port - if this is a trunk port.
8. Select one of the following an options from the Flow Control
Mode field pull-down menu:
Enable – Set flow control to prevent buffer overflows.
Disable – When flow control is causing congestion in other
areas of the network.
Enable (Send Only) – Set flow control to prevent buffer
overflows on sent traffic.
Enable (Respond Only) – Set flow control to prevent buffer
overflows on respond traffic.
9. Select Enable from the Pace Priority Mode field pull down
menu to recognize and use 3Com’s PACE priority
mechanism.