Bizfon 4000 - Manual (Page 20)

Bizfon Manual I: Installation Guide Step 2.2: System Configuration Wizard
Finishing the System Configuration Wizard
Fig. I-15: System Configuration Wizard finishing page
Click on Finish to complete the System Configuration Wizard. The Bizfon will then stop in-
ternal functions and apply the changes made in the Wizard.
Fig. I-16: Wizard Execution Progress page
After this is complete, the Bizfon will reply with the Confirm Settings page requesting con-
firmation of the changes. Press on OK to confirm the settings.
Fig. I-17: Confirm Settings page
Please Note: you must confirm the settings within 20 minutes, otherwise the device will re-
vert back to the previous configuration and reboot.
Please Note: If you do not use DHCP for your LAN and you have changed your LAN set-
Bizfon2000 and Bizfon4000 (SW Version 3.1.x) 20