AEG HE604000H - Manual (Page 23)

The stainless steel edge of the plate can be slightly discoloured as a result of the thermal
load.
WHAT TO DO IF…
Problem Possible cause and remedy
The appliance does not operate. • Examine the fuse in the electrical system of the house in the
fuse box. If the fuses blow time after time, speak to an author-
ised electrician.
The plate does not heat up. • Make sure that you plug in the appliance and switch the elec-
trical supply.
• Make sure that you turn correct control knob.
• Examine the fuse in the electrical system of the house in the
fuse box. If the fuses blow time after time, speak to an author-
ised electrician.
Results of plate are not satis-
factory.
• Make sure that plate is clean and dry.
• Make sure that the cooking pan is the correct size for the
plate.
• Make sure that cooking pan has a flat bottom.
• Make sure that the setting is correct for type of cooking.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a
solution to the problem yourself, speak your dealer or the local Service Force Centre.
If you operated the appliance incorrectly, or the installation was not carried out by a regis-
tered engineer, the visit from the customer service technician or dealer may not take place
free of charge, even during the warranty period.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
What to do if… 23