New Buck Corporation 94NC User Manual
Page 25
SECTION VIII
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Sluggish Heater
Obstruction in chimney
Check for and remove
obstruction
Improperly sealed trim kit or
direct connect kit
(a) Check trim kit gasketing
seal to fireplace and
gasket as necessary to
seal unit. Gasket under
front bottom of stove if
needed.
(b) Check seal if using direct
connect and correct.
Manual damper in chimney is
closed
Open manual damper and
wire shut with stainless steel
wire or remove damper
Wet or unseasoned wood
being burned
Burn dry, natural seasoned
hard wood
Poor chimney draft
Improper chimney height or
wrong size flue is being used.
Cooler temperatures caused
by external chimney
Improper wood loading
Load wood length way from
front to rear
Page 23