Brother HL-P2000 - Manual (Page 39)

USER’S GUIDE
6–4
3. Remove the old toner cartridge from the drum unit by pulling it out
gently.
Fig. 6-5 Removing the Old Toner Cartridge
!
Caution
Handle the toner cartridge carefully. If toner scatters on your hands or
clothes, wipe or wash it off with cold water immediately.
4. Unpack the new toner cartridge, gently shake it five or six times and
then remove the protective part.
!
Caution

Only unpack the toner cartridge immediately before installing it into
the machine. If toner cartridges are left unpacked for a long period of
time, the toner life is shortened.

You can only use a Brother genuine toner cartridge (TN-300
series) which is specially formulated to ensure top print quality.
Damage caused by using toner cartridges other than those
supplied by Brother is not covered under any warranty or service
agreement.
Fig. 6-6 Shaking the Toner Cartridge
and Remove the Protective Part