Brother HL-P2000 - Manual (Page 54)

USER’S GUIDE
7-2
For errors shown below, the machine indicates an operator call by
blinking the
Alarm lamp. If you use the machine with the supplied
Windows driver, the status monitor will appear to indicate the error on
your computer screen. The machine also prints some error messages on
paper.
Error Action
COVER OPEN Close the top cover of the machine.
PRINT OVERRUN

Press the panel
switch to print the data remaining in the
machine.

If you use the supplied Windows

driver, try again after
turning on Error Recovery in the PRINT menu of your
application software, (Refer to the Help section in the
Windows


machine driver for the details.)

If this does not clear the error, reduce the complexity of
your document or reduce the print resolution.
MEMORY FULL
This error can only occur
when using DOS.

Press the panel
switch to print the data remaining in the
machine.

Reduce the print resolution or reduce the complexity of
your document.


Parallel Interface Line
Error

Press the panel
switch to resume printing.

Check that the connection between your computer and
machine is secure and correct, and check the interface
cable.