Boss Audio Systems Boss CDSM AMP EFFECTS PROCESSOR GT-100 - Manual (Page 36)

CTL/EXP
36
About the Range of a Controller’s Change
This sets the operational range within which the value of the setting
changes when an expression pedal or other controller that changes
the value consecutively is used as the source . If the controller is
moved outside the operational range, the value does not change, it
stops at “minimum” or “maximum .”
(Example) With ACT RANGE LO: 40, ACT RANGE HI: 80
When the
pedal is fully
raised
ACT
RANGE
LO
ACT
RANGE
HI
When the
pedal is fully
advanced
Degree to
Which Expres-
sion Pedal Is
Depressed
0 127
A
llo
w
able
Par
amet
er
Settings R
ange
40 80
MAX
MIN
40 80 60
Value
ON
OFF
Degree to
Which Expres-
sion Pedal Is
Depressed
0 127
When the
pedal is fully
raised
ACT
RANGE
LO
ACT
RANGE
HI
When the
pedal is fully
advanced
Center
Value
* When using a footswitch or other on/off switching controller as the
source, leave these at “ACT RANGE LO: 0” and “ACT RANGE HI: 127 .”
With certain settings, the value may not change .