AEG MR 4139 BT schwarz - Manual (Page 33)

English
33
3. Chose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device “AEG
MR 4139 BT” will show in your player as a selection.
NOTE:
Your device can only connect one player at a time.
If your device is already connected with another
player, your device will not be listed in the Blue-
tooth menu.
4. Now enter the password “0000” in your player,
depending on the device manufacturers, model, and
software version.
If the registration has been carried out successfully, a short
beep is emitted.
For the further procedure, please refer to the user manual
of the playback unit. If possible, adjust the volume of the
external unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices
• In the case of problems when registering a player, deac-
tivate the WiFi / mobile data function of your player.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
• If a mobile phone on which you are playing music re-
ceives a call, the music will be interrupted. The device,
however, will not play back the sound. After you have
ended the call, the devices are connected to each
other again and playback continues.
Description of the Bluetooth controls
NOTE:
Depending on the player, not all functions might be sup-
ported.
PLAY (6)
You can pause and continue music playback. Press again to
continue playback.
PREV (4)
Press 1 x =
Restart of the song from the beginning.
Press 2 x = Skip to the previous song.
Press 3 x = Skip to the song before the previous song.
Keeping the button pressed initiates a track search.
NEXT (7)
Press to skip to the next song and the following songs.
Keeping the button pressed initiates a track search.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter-
gents.
• Do not submerge the device in water.
Troubleshooting
Fault Cause Solution
Unit cannot be
operated. Unit crashes
and “hangs”. Disconnect from the
mains for around 5 sec-
onds. Then switch the unit
on again.
No audio signal
via the Bluetooth
connection Device is not
paired to
audio source. Check whether a connec-
tion exists. If necessary,
pair the device again to
the audio source.
Volume too
low Increase the volume on
your device.
Increase the volume on
the audio source.
Device cannot
be connected. Pairing does
not work Check whether the audio
source supports the A2DP
protocol.
Audio source
is switched off Switch on the audio
source
Bluetooth is
switched off
at the audio
source. Switch on the Bluetooth
function in the audio
source.
Bluetooth
version is not
supported. Use a different playback
unit.