Controls, Lighting – AEG X59143MD0 User Manual

Page 4

Advertising
background image

4

www.aeg.com

4. CONTROLS

A

B

C

D

E

F

G

H

5. LIGHTING

Button Function

Led

A

Turns the Lighting System on and off.

If pressed and held for 5 seconds with the hood

turned off and no alarm, do:

Enables the Activated Charcoal Filter Alarm.

Disables the Activated Charcoal Filter Alarm.

On or Off

2 Flashes Led buttom H

1 Flash Led buttom H

B

Turns the Motor on and off.

Enables Keyboard Lock mode if pressed and

held for 5 seconds.

It is disabled by pressing the button for 5 seconds.

On or Off

All the Leds flash twice and during

Keyboard Lock the Leds light up in

sequence.

All the Leds flash once.

C

Activates speed one.

On.

D

Activates speed two.

On.

E

Activates speed three.

On.

F

Activates intensive speed from any other speed,

including motor off. This speed is timed to run

for 5 minutes, after which the system will return

to the speed that was previously set. Suitable to

deal with se-vere cooking fumes.

It is deactivated by pressing the button or turning

the motor off.

On.

G

Activates delayed automatic shutdown of the

motor and the lighting system after 15 minuts.

Suitable to complete the elimination of residual

odours, it is deactivated by press-ing the button

of turning the motor off.

If pressed and held for 5 seconds with the hood

and lightturned off and no alarm, do:

Enables the Remote control.

Disables the Remote control.

On.

2 Flashes Led buttom C + B

1 Flash Led buttom C + B

H

Performs a Reset of the Filter saturation alarm

when the button is pressed for ap-proximately 2

seconds with the hood turned off.

After 100 hours operation the Led

lights up continuously to indicate satu-

ration of the Metal Grease Filters.

After 200 hours operation the Led

flashes to indicate saturation of the

Activated Charcoal Filters.

Advertising