Billion Electric Company 7560G - Manual (Page 69)

Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router
Chapter 4:Configuration
Example: Configuring your firewall to allow for a publicly accessible web server
on your LAN
The pre-defined port filter rule for HTTP (TCP port 80) is the same no matter whether the
firewall is set to a high, medium or low security level. To setup a web server located on the local
network when the firewall is enabled, you have to configure the Port Filters setting for HTTP.
As you can see from the diagram below, when the firewall is enabled with one of the three
presets (Low/Medium/High), inbound HTTP access is not allowed.
Configuring Packet Filter
1. Click Packet Filter - you will get the following page:
Click Port Filters
63