Brother NX-200 - Manual (Page 108)

APPENDIX ——————————————————————————————————————————————————————————
102
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Operation beep
Each time a key is pressed or an incorrect operation
is performed, a beep is sounded.
■ For a correct operation
One beep is sounded.
■ If an incorrect operation is performed
Two or four beeps are sounded.
■ If the machine locks up, for example, because
the thread is tangled
The sewing machine continues to beep for four
seconds. The machine automatically stops.
Be sure to check for the cause of the error, and
correct it before continuing to sew.
Removing the upper cover
If the upper cover of the sewing machine was
removed, re-attach it as described in the following
procedure.
1
Hold the upper cover level.
2
Push the upper cover down to re-attach it to
the machine.
F0_brotherE.book Page 102 Wednesday, May 21, 2003 11:38 AM