Brother NX-200 - Manual (Page 40)

GETTING READY ————————————————————————————————————————————————————————
34
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
4
Turn the screw at the bottom of the legs to
adjust their height.
5
When you are finished using the wide table,
remove it.
While slightly lifting up the wide table, pull it
off to the left.
6
Install the flat bed attachment back in its
original position.
Memo
● With the legs folded up, the wide table can
be stored attached to the hard case.
● Do not move the sewing machine while
the wide table is attached, otherwise
damage or injuries may occur.
CAUTION
F0_brotherE.book Page 34 Wednesday, May 21, 2003 11:38 AM