Olympus Stylus 1020 - Manual (Page 24)

Menu op
erati
ons
24
EN
[COMBINE IN CAMERA 1]
As you recompose the frame, the camera automatically shoots and combines pictures for a
single panoramic picture in the camera.Only combined pictures are saved.
[COMBINE IN CAMERA 2]
Pictures are manually shot, and the camera automatically combines pictures for a single
panoramic picture in the camera.Only combined pictures are saved.
SAVE OK SAVE OK MENU CANCEL SAVE OK MENU CANCEL MENU CANCEL MENU CANCEL
• Take the first picture.
• When you slightly move the camera in the direction of the next picture, a target mark and a pointer
appear.
• The pointer moves as you pan the camera. Move the camera slowly and steadily until the pointer
overlaps the target mark, then stay still.
• The camera shoots the second picture automatically.
• After the current subject appears on the monitor, take the third picture in the same manner as the
second one.
• After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press e before shooting the third picture.
• To cancel making the panoramic picture during shooting, press m before pressing e.
2nd 3rd
Target mark Pointer
Connects pictures
from left to right
1st
Connects pictures
from left to right
• Use 4 3 to specify at which edge you want to connect the pictures, and then take the first
picture.
• Compose your second shots so that the edge of the first picture overlaps the edge of the
second picture, then shoot.
• Take the third picture in the same manner as the second one.
• After the third picture is taken, the pictures are automatically combined, and then the combined
picture is displayed. To combine only two pictures, press e before shooting the third
picture.
• To cancel making the panoramic picture during shooting, press m before pressing e.
MENU CANCEL MENU CANCEL MENU CANCEL SAVE OK SAVE OK
1st 2nd 3rd
d4344_4356_e_0000.book Page 24 Monday, December 17, 2007 9:13 AM