Olympus Stylus 1020 - Manual (Page 47)

Usi
ng OLYMPUS Mast
er
EN
47
4
The camera is recognized by the computer.
• Windows
When you connect the camera to your computer for the first time, the computer attempts to
recognize the camera. Click “OK” to exit the message that is displayed. The camera is
recognized as a “Removable Disk”.
• Macintosh
The iPhoto program is the default application for managing digital images. When you
connect your digital camera for the first time, the iPhoto application starts automatically, so
close this application and start OLYMPUS Master.
Note
• The camera functions are disabled while the camera is connected to a computer.
• Connecting the camera to a computer via a USB hub may cause unstable operation. In this case,
do not use a hub, but connect the camera directly to the computer.
• Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected in Step
3, 3 is pressed and [MTP] is selected.
Windows
1
Double-click the “OLYMPUS Master 2” icon on the desktop.
Macintosh
1
Double-click the “OLYMPUS Master 2” icon in the “OLYMPUS Master
2” folder.
• The browse window is displayed.
• When OLYMPUS Master is started up for the first time after installation, the OLYMPUS
Master initial setting screen and user registration screen are displayed before the browse
window. Follow the on-screen instructions.
Start up the OLYMPUS Master software
d4344_4356_e_0000.book Page 47 Monday, December 17, 2007 9:13 AM