Olympus FE-110 - Manual (Page 18)

2
Ti
ps
before you start ta
king pi
cture
s
18
If correct focus cannot be obtained
The camera automatically detects the focus target in the frame. The level
of contrast is one of the criteria it uses to detect the subject. The camera
may fail to determine subjects with lower contrast than the surroundings or
with an area of extremely strong contrast in the frame. If this happens, the
simplest solution is to use the focus lock.
1
Position the AF target mark on
the subject you want to focus on.
• When shooting a hard-to-focus or fast-
moving subject, focus the camera on an
object about the same distance away as
the subject.
2
Press the shutter button halfway
until the green lamp lights.
• When the focus and exposure are
locked, the green lamp lights.
• When the green lamp blinks, the focus
and exposure are not locked. Release
your finger from the shutter button,
re-position the AF target mark on the subject
and press the shutter button halfway again.
3
Keeping the shutter button
pressed halfway, recompose
your shot.
How to focus (focus lock)
2560 2560 2560 1920 1920 1920
AF target mark
Shutter button
2560 2560 2560 1920 1920 1920
Green lamp