Olympus FE-110 - Manual (Page 73)

73
Conne
cting the cam
er
a
to
a co
m
p
ute
r
7
Flow
Using the USB cable provided with your camera, you can connect the
camera and computer and download (transfer) the images to your computer
using the OLYMPUS Master software, also provided with the camera.
Install the OLYMPUS Master software gP. 75
Connect the camera to the computer using the USB cable gP. 79
Start up the OLYMPUS Master software gP. 80
Download image files to the computer gP. 82
Disconnect the camera from the computer gP. 83
TIPS
Viewing and editing downloaded images
→ If you want to process images using graphics applications, make sure you
download the images to your computer first. Depending on the software, the
image files may be damaged if the images are processed (rotated, etc.)
while they are still in the internal memory or on the card.
If the data cannot be downloaded from the camera using the USB cable
→ Image files on the xD-Picture Card may be downloaded using the optional
PC card adapter. For details, visit the Olympus web site at the address
shown on the back cover of this manual.
Note
• It is recommended that you use the optional AC adapter when connecting the
camera to a computer. If you use batteries, make sure they have enough
power. The camera does not turn off automatically while it is connected to
(communicating with) a computer. If the battery power runs out, the camera will
stop whatever operation it is performing. This may result in a computer
malfunction, or loss of image data (file) being transmitted.
• Do not turn the camera off while it is connected to the computer. Doing so could
cause the computer to malfunction.
• Connecting the camera to a computer via a USB hub may cause unstable operation
if there is any problem with compatibility between the computer and the hub. In this
case, do not use a hub, but connect the camera directly to the computer.
OLYMPUS Master CD-ROM USB Cable Computer equipped with a USB port
Prepare the following items before starting.