Olympus Tough TG-1 iHS - Manual (Page 47)

47 EN
Resetting the fi le names of pictures [File Name] Resetting the fi le names of pictures [File Name]
d (Settings Menu 2)  File Name
Month: 1 to C
(A=October,
B=November,
C=December)
Day: 01 to 31
Pmdd
Folder name Folder name File name
DCIM 100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering Automatic
numbering
Submenu 2 Application
Reset
This resets the sequential number
for the folder name and fi le name
whenever a new card is inserted.
*1
This is useful when grouping images
on separate cards.
Auto
Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name from
the previous card. This is useful for
managing all image folder names
and fi les names with sequential
numbers.
*1 The number for the folder name is reset to 100, and the
one for the fi le name is reset to 0001.
Adjusting the image processing Adjusting the image processing
function [Pixel Mapping]
function [Pixel Mapping]
d (Settings Menu 2)  Pixel Mapping
This function has already been adjusted at factory
shipping, and no adjustment is needed right after
purchase. Approximately once a year is recommended.
For best results, wait at least one minute after taking or viewing
pictures before performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to perform it again.
To adjust the image processing function To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image processing
function starts
Adjusting the brightness of the monitor Adjusting the brightness of the monitor
[[s
s]]
d (Settings Menu 2)  s
To adjust the monitor brightness To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing the
screen, and then press the A button.
s Back MENU