Olympus Tough TG-1 iHS - Manual (Page 36)

36 EN
Menus for Shooting Functions Menus for Shooting Functions
The default settings of the function are highlighted in .
For information on using the menus, see “Using the
Menu” (p. 8).
Restoring the shooting functions to the Restoring the shooting functions to the
default settings [Reset]
default settings [Reset]
z (Camera Menu 1)  Reset
Submenu 2 Application
Yes
Restores the following menu
functions to the default settings.
• Flash (p. 20)
• Macro (p. 29)
• Self-timer (p. 29)
• Exposure compensation (p. 30)
• White balance (p. 30)
• ISO (p. 31)
• Drive (p. 31)
• Image Size (still images) (p. 32)
• Menu functions in [z, A]
(p. 36 to 40)
No The settings will not be changed.
Selecting the image quality for still Selecting the image quality for still
images [Compression]
images [Compression]
z (Camera Menu 1)  Compression
Submenu 2 Application
Fine Shooting at high quality.
Normal Shooting at normal quality.
“Number of storable pictures (still images)/Continuous
recording length (movies) in the internal memory and
cards” (p. 66, 67)
Brightening the subject against Brightening the subject against
backlight [Shadow Adjust]
backlight [Shadow Adjust]
z (Camera Menu 1)  Shadow Adjust
Submenu 2 Application
Auto
Automatically On when a compatible
shooting mode is selected.
Off The effect is not applied.
On
Shoot with automatic adjustment to
brighten an area that has become darker.
When set to [Auto] or [On], [ESP/n] (p. 37) is
automatically fi xed to [ESP].
Selecting the focusing area [AF Mode] Selecting the focusing area [AF Mode]
z (Camera Menu 1)  AF Mode
Submenu 2 Application
Face/iESP
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame
*1 ; when the shutter
button is pressed halfway and the
camera focuses, the frame turns to
green
*2 . If no face is detected, the
camera chooses a subject in the
frame and focuses automatically.)
Spot
The camera focuses on the subject
located within the AF target mark.
AF Tracking
The camera tracks the subject
movement automatically to focus on
it continuously.
*1 For some subjects, the frame may not appear or may
take some time to appear.
*2 If the frame blinks in red, the camera cannot focus. Try
refocusing on the subject.