Olympus Stylus 1000 - Manual (Page 46)

46
EN
Usi
ng OLYMPUS Mast
er
To disconnect the camera
1
Make sure that the card access lamp has
stopped blinking.
2
Make the following preparations for
disconnecting the USB cable.
Windows 98SE
1 Double-click the “My Computer” icon and right-click the
“Removable Disk” icon to display the menu.
2 Click “Eject” on the menu.
Windows Me/2000/XP
1 Click the “Unplug or Eject Hardware” icon in the system
tray.
2 Click the message that is displayed.
3 When a message saying that the hardware can be ejected
safely, click “OK”.
Macintos h
1 The trash icon changes to the eject icon when the
“Untitled” or “NO_NAME” icon on the desktop is dragged.
Drag and drop it on the eject icon.
3
Disconnect the USB cable from the camera.
Note
• Windows Me/2000/XP: When you click “Unplug or Eject Hardware”, a warning message may be
displayed. Make sure that image data is not being downloaded from the camera and that all
applications are closed. Click the “Unplug or Eject Hardware” icon again and disconnect the
cable.
Card access lamp