Olympus E-100 RS - Manual

http://www.olympus.com
ⅷ
Quick-Start Guide
ⅷ
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000
(Customer support) Tel. 1-888-553-4448
Thank you for purchasing the Olympus E-100RS.
This Quick-Start Guide has been designed for those who want to become familiar with
the E-100RS in a very short time. The “Names of parts” section is especially helpful for
identifying parts easily without having to read through the complete Instruction manual.
For detailed operations, please refer to the complete Instruction manual.
1
Getting Ready...
Loading the batteries
1. Follow the procedure below.
1
2 1
2
Slide the battery
compartment
lock toward .
Open the battery
compartment
cover.
Load the batteries.
AA batteries Lithium battery
(provided) packs
Close the battery
compartment
cover.
Slide the battery
compartment
lock toward .
ૺ Close the battery compartment cover while pressing the batteries with the cover.
ૺ Manganese batteries cannot be used.
2. Inserting a SmartMedia or CompactFlash card.
* Before inserting, check that the Power switch is off and there are no images on the Viewfinder/Monitor.
* To choose SmartMedia or CompactFlash, select one (SM/CF) on the menu or simply insert a Card into the
camera.
Open the Card cover and push in the card* as shown below.
(*The pictures you take will be stored in the card.)
Open the
Card cover.
Push the Card in and
close the Card cover. Push the
Card in. Tab
3. Turn on the camera.
Set the Power switch to ON.
Power switch
You can select camera functions using the Mode dial. You will probably want to
try the Program mode first, which lets you take properly-exposed pictures by
simply pressing the Shutter button.
M O D E D IA
L
S
M S-P
rg A
P
[Still picture shooting mode]
P:
Simply press the Shutter button to take a picture.
A: Set the desired aperture manually.
S: Set the desired shutter speed manually.
M: Set the desired aperture and shutter speed manually.
S-Prog: Take pictures under a variety of conditions. (Portrait/
Sports/Landscape/Night Scene)
[Movie record mode]
: Records movies.
[Playback mode]
: Plays back your recording.
Mode dial
Adjusting the Diopter
Turn the Diopter adjustment dial
until you see the AF target mark
clearly in the Viewfinder.
P F2.8 1/30 0.0
[ SM ]
Viewfinder
AF target mark
Diopter adjustment dial
Lens cap
Lens
Remote control
receiver
Zoom lever/Index-
display lever
Shutter button
Mode dial
Self-timer lamp/AF assist lamp
Control panel
(See the other side for details.)
Diopter adjustment dial
5-pin external flash socket
Microphone
Remote cable jack
USB connector
DC-IN jack
External
microphone jack
A/V OUT jack
Connector cover
Flash (built-in)
Flash switch
Strap eyelet
Flash mode button /Erase button
DRIVE button
Metering mode button
Macro button
Power switch
(POWER OFF/ON/RESET)
AE lock button (AEL)/
Multi-metering button/Print button
Tripod socket
Card cover
Speaker
Battery compartment
cover
Battery compartment lock
Card access lamp
Menu button
Monitor button
Arrow pad
Viewfinder
INFO button
Monitor
OK button/
Manual focus
button (MF)/
Protect button
Names of parts
Setting the date/time
1. Set the Mode dial to P.
2. Press (Menu button).
The Menu appears on the screen.
Press
(Monitor buton) to select whether to display the menu on the Monitor or the
Viewfinder.
3. Press on the Arrow pad to move the green frame in the Menu,
then select “MODE SETUP”.
“SETUP” appears on the screen.
The selected item appears in green.
4. Press OK.
The MODE SETUP screen appears.
SM
CF
[ 1 / 5 ]
F2.8 1/800 0.0 P
SM/CF
WB
[ SM ]
PRE-CAPTURE
SETUP
[ 5 / 5 ]
F2.8 1/800 0.0 P
ISO
[ SM ]
S-Prg
MODE SETUP
ON
OFF
NORMAL
1360 x1024
640 x 480
[ 1 / 3 ]
ALL RESET
TIFF
SQ
[ SM ]
OK
Menu screen 1/5 Menu screen 5/5 MODE SETUP screen 1/3
5. Press to select , then press .
“SETUP” appears on the screen.
To go to the previous page, move the cursor to the top item and press the
button
on the Arrow pad.
m / f t m
OFF SHOT CANCEL
1 2 . 2 3 . ’ 0 0
1 2 : 3 4
[ 3 / 3 ] [ SM ]
SETUP
m / f t
SHOT CANCEL
[ 3 / 3 ] [ SM ]
MODE SETUP screen 3/3
Date/time setting screen
6. Press OK.
The Date/time setting screen appears.
7. Press / on the Arrow pad to select the date order.
(Date order selections: date/month/year, month/date/year, year/month/date)
8. Press , then press / to adjust the date/time.
To go to the next setting (i.e. month to year, etc.), press . To go back to the
previous setting (i.e. year to month, etc.), press .
9. Press OK when you complete your settings.
10. To cancel the Menu, press OK until the Menu disappears.
1AG6P1P0845– – VT1579-01
For SmartMedia For CompactFlash
When the tab pops
out, pull it down as
shown, then close
the Card cover.
Tab