Olympus VG-110 - Manual (Page 40)

40 EN
For information on using the menus, see “Using the Menu” (p. 4).
To erase all images [All Erase] To erase all images [All Erase]
1 Use FG to select [All Erase], and press the
Q button.
2 Use FG to select [Yes], and press the Q button.
To individually select and erase images To individually select and erase images
[Sel. Image]
[Sel. Image]
1 Use FG to select [Sel. Image], and press the
Q button.
2 Use HI to select the image to be erased, and press
the Q button to add a R mark to the image.
Press the W zoom button to display an index view.
Images can be quickly selected using
FGHI.
Press the T button to return to the single frame
display.
MENU OK
Sel. Image
Erase/Cancel
R mark
3 Repeat Step 2 to select the images to be erased,
and then press the m button to erase the selected
images.
4 Use FG to select [Yes], and press the Q button.
The images with a R mark are erased.
●
●
Saving print settings to the image data Saving print settings to the image data
[Print Order]
[Print Order]
q (Playback menu) X Print Order
“Print Reservations (DPOF)” (p. 49)
Print reservation can be set only for still images that
are recorded to the card.
Protecting images [ Protecting images [?
?]]
q (Playback menu) X ?
Protected images cannot be erased by [Erase] (p. 25,
39), [Sel. Image], or [All Erase] (p. 39), but all images
are erased by [Memory Format]/[Format] (p. 41).
1 Use HI to select an image.
2 Press the Q button.
Press the Q button again to cancel the settings.
3 If necessary, repeat Steps 1 and 2 to protect other
images, and press the m button.
Rotating images [ Rotating images [y y]]
q (Playback menu) X y
1 Use HI to select an image.
2 Press the Q button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the m button.
The new picture orientations will be saved even after
the power is turned off.
●