43 en, Changing the display language, Changing the display language [ w w – Olympus VG-110 User Manual

Page 43

Advertising
background image

43

EN

For information on using the menus, see “Using the Menu” (p. 4).

Adjusting the CCD and the image

Adjusting the CCD and the image
processing function [Pixel Mapping]

processing function [Pixel Mapping]

r (Settings 1) X Pixel Mapping

This function has already been adjusted at factory

shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.

For best results, wait at least one minute after taking

or viewing pictures before performing pixel mapping.
If the camera is turned off during pixel mapping, be
sure to perform it again.

To adjust the CCD and the image

To adjust the CCD and the image
processing function

processing function

Press the

Q button when [Start] (Submenu 2) is

displayed.

The camera checks and adjusts the CCD and the
image processing function at the same time.

Adjusting the brightness of the monitor

Adjusting the brightness of the monitor
[[
s

s]]

s (Settings 2) X s

Submenu 2

Application

Bright/Normal

Selects the monitor brightness
depending on the surrounding
brightness.

Saving battery power between shots

Saving battery power between shots
[Power Save]

[Power Save]

s (Settings 2) X Power Save

Submenu 2

Application

Off

Cancels [Power Save].

On

When the camera is not being used
for approx. 10 seconds, the monitor
automatically turns off to save battery
power.

To resume standby mode

To resume standby mode

Press any button.

Changing the display language [

Changing the display language [

W

W]]

s (Settings 2) X W

Submenu 2

Application

Languages

The language for the menus and
error messages displayed on the
monitor is selected.

1

Use

FGHI to select your language and press the

Q button.

Advertising