Olympus STYLUS TOUGH-6000 - Manual (Page 33)

33 EN
Adjust the settings for the functions while referring to “Using the Menu” (p. 3).
Taking pictures with
[COMBINE IN CAMERA 2]
1 Use CD to select the direction that the
frames are combined.
MENU CANCEL
Direction for
combining the
next frame
2 Press the shutter button to take the fi rst
frame.
A guide frame appears as a reference.
1st frame
MENU CANCEL MENU CANCEL
Guide frame
Joint area
3 Compose the second shot so that the
joint area overlaps the guide frame.
Composition of the 2nd frame
OK SAVE MENU CANCEL
●
4 Press the shutter button to take the
second frame.
To combine only two pictures, press the
o button before taking the third frame.
5 Take the third frame in the same way as
Steps 3 to 4.
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To cancel making panoramic picture during
shooting, press the m button.
Taking pictures with [COMBINE IN PC]
1 Use ABCD to select the direction that
the frames are combined.
2 Press the shutter button to take the fi rst
frame, and then compose the second
shot.
Compose the shot using the guide frame so
that the two adjacent frames overlap.
3 Repeat Step 2 until the number of
required frames are taken, and then press
the
o button when fi nished.
When the g mark is displayed, you cannot
continue shooting any further. Panorama
shooting is possible for up to 10 frames.
Refer to the OLYMPUS Master 2 help
guide for details on how to make panorama
images.
●
●