Error message, 57 en – Olympus STYLUS TOUGH-6000 User Manual

Page 57

Advertising
background image

57

EN

Error message

When one of the messages below is

displayed on the monitor, check the
corrective action.

Error message

Corrective action

q

CARD ERROR

Card problem
Insert a new card.

q

WRITE

PROTECT

Card problem
Use a computer to cancel the
read-only setting.

>

MEMORY FULL

Internal memory problem

Insert a card.
Erase unwanted images.

*1


q

CARD FULL

Card problem

Replace the card.
Erase unwanted images.

*1


OK

SET

CARD SETUP

CLEAN CARD

FORMAT

Card problem

Use AB to select [CLEAN
CARD], and press the

o button. Take out the card,

wipe the contact area (p. 62)
with a soft, dry cloth, and then
load the card again.
Use AB to select [FORMAT],
and press the

o button. Next,

use AB to select [YES], and
press the

o button.

*2

IN

OK

SET

MEMORY SETUP

POWER OFF

MEMORY FORMAT

Internal memory problem
Use AB to select [MEMORY
FORMAT], and press the

o button. Next, use AB to

select [YES], and press the

o button.

*2

L

NO PICTURE

Internal memory/Card problem
Take pictures before viewing
them.

r

PICTURE

ERROR

Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image fi le
is corrupted.

Error message

Corrective action

r

THE IMAGE

CANNOT

BE EDITED

Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.

CARD-COVER

OPEN

Operation problem
Close the battery/card
compartment cover.

g

BATTERY

EMPTY

Battery problem
Charge the battery.

NO

CONNECTION

Connection problem
Connect the camera and
computer or printer correctly.

NO PAPER

Printer problem
Load paper into the printer.

NO INK

Printer problem
Refi ll the ink in the printer.

JAMMED

Printer problem
Remove the jammed paper.

SETTINGS

CHANGED

*3

Printer problem
Return to the status where the
printer can be used.

PRINT ERROR

Printer problem
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.

r

CANNOT PRINT

*4

Problem with selected image
Use a computer to print.

*1

Before erasing important images, download them to

a computer.

*2

All data will be erased.

*3

This is displayed, for instance, when the printer’s

paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.

*4

This camera may be unable to print images taken by

other cameras.

Advertising