Olympus SP-320 - Manual (Page 46)

46
3
Basi
c shooti
n
g
functi
ons
Selecting the flash (FLASH)
Slave flash photography ( Q FLASH)
This setting is for when using a commercially available slave flash that is
synchronized with the camera flash.
The amount of light emitted by the flash can be adjusted in 10 levels. The flash can
fire in sequential shooting mode, but the interval between shots will be longer if a
high emission level is set.
Flash mode automatically changes to [
#] for all flash modes except [$].
Top menu [MODE MENU] [CAMERA] [QFLASH] [SLAVE]
g“Using the menus” (P. 17)
1
Select an emission level from [1]
to [10], then press Z.
SLAVE FLASH
OK
1
SELECT GO