Olympus SP-320 - Manual (Page 67)

67
5
A
d
d
iti
on
al sh
oo
tin
g
fu
nctio
n
s
Sequential shooting
There are 4 sequential shooting modes: sequential shooting, high speed
sequential shooting, AF sequential shooting and auto bracketing (7).
Ex: When the exposure differential is set to [±1.0] with [7] and the number of
frames is set to [×3]
(j / i / k
Top menu [MODE MENU] [CAMERA] [DRIVE]
[j] / [i] / [k] g“Using the menus” (P. 17)
1
Take the picture.
• Press the shutter button fully and keep it pressed. The camera will take
pictures in sequence until you release the button. You can only take 2
frames at a time with high speed sequential shooting.
• You are recommended to use the viewfinder for sequential shooting. During
high speed sequential shooting, the subject does not appear on the monitor.
(7
Top menu [MODE MENU] [CAMERA] [DRIVE] [7]
g“Using the menus” (P. 17)
o Shoots 1 frame at a time when the shutter button is pressed.
j Focus, exposure and white balance are locked at the first frame.
The sequential shooting speed varies depending on the record mode
setting.
i Pictures can be taken at a faster speed than normal sequential
shooting.
k Adjusts the focus 1 frame at a time. The shooting speed is slower than
for normal sequential shooting.
7 Takes pictures sequentially while changing the exposure for each
frame. The focus and white balance are locked at the first frame.
-1.0 0.0 +1.0