Olympus D-460 Zoom - Manual (Page 99)

99
LCD BRIGHTNESS
You can adjust the brightness of the LCD monitor.
Close the lens barrier and
press the LCD monitor
ON/OFF button to turn on the
LCD monitor.
Press the Menu button to
display the screen shown.
Press the top/bottom arrows
on the Jog dial to select
,
and press the right arrow.
Select the brightness using
the top/bottom arrows on the
Jog dial.
• Adjust + to lighten the display
and adjust – to darken it.
Press the OK button to save
the setting. Press again to
cancel the Menu.
• If the Menu button is pressed
before the OK button, the
setting and Menu mode will be
canceled.
5
4
3
2
1
[ 2 / 2 ]
[ 16 ]
CHANGE END
LCD monitor
Note:
• The setting will remain even after the power is turned off until it is
readjusted.
4 3
2 1
5
OK SET RETURN