Olympus Tough TG-820 iHS - Manual (Page 26)

26 EN
3
Use HI to select the mode and then press
the A button to set.
N ORM
4 4 00:34 00:34
12 M
Icon indicating the scene mode
that is set
In  modes, the optimum shooting settings
are pre-programmed for specifi c shooting scenes.
Functions may be limited in some modes.
Option Application
B Portrait/F Landscape/
G Night Scene *1 / M Night+Portrait *1 /
C Sport/N Indoor/W Candle *1 /
R Self Portrait/S Sunset *1 /
X Fireworks *1 /V Cuisine/
d Documents/q Beach & Snow/
M Snapshot/k Wide1 *2 /l Wide2 *2 /
H Macro *2 /U Pet Mode - Cat/
t Pet Mode - Dog/a Snow *2 /
j 3D Photo/h Backlight HDR *3
The camera
takes a picture
using the
optimum settings
for the scene
conditions.
*1 When the subject is dark or when taking fi reworks,
noise reduction is automatically activated. This
approximately doubles the shooting time during which
no other pictures can be taken.
*2 TG-820 only
*3 When set to [h Backlight HDR], [Image Size] (p. 33)
is limited to [n] or lower. This is recommended for
shooting a fi xed subject.
To take underwater photos To take underwater photos
Select [M Snapshot], [k Wide1] *1 , [l Wide2] *1, 2 ,
[H Macro] *1 .
*1 TG-820 only
*2 When set to [l Wide2], the focus distance is
automatically fi xed to approx. 5.0 m (16.4 ft.).
“Important information about water and shock
resistant features” (p. 68)
To lock the focus distance for underwater To lock the focus distance for underwater
shoots (AF lock)
shoots (AF lock)
When [M Snapshot], [k Wide1] * , or, [H Macro] * is
selected, press the A button.
* TG-820 only
AF lock mark
0.0 0.0 AF LOCK AF LOCK
12 M
4 4 00:34 00:34
To cancel, press the A button again to clear the AF
lock mark.
Shooting 3D images Shooting 3D images
In this mode, 3D images are shot for viewing on
3D-compatible display devices.
Images shot in 3D mode cannot be displayed in 3D
on this camera’s monitor.
1 Use HI to select [Auto] or [Manual] and then press
the A button to set.