Olympus SZ-31MR iHS - Manual (Page 13)

13 EN
When to charge the batteries When to charge the batteries
Charge the battery when the error message shown below
appears.
Flashes in red
Battery Empty
Computer Software Installation and
Product Registration
Installation of [ib] computer software is available on
Windows computers only.
Windows Windows
1
Insert the supplied CD in a CD-ROM drive.
Windows XP
● A “Setup” dialog will be displayed.
Windows Vista/Windows 7
● An Autorun dialog will be displayed. Click “OLYMPUS
Setup” to display the “Setup” dialog.
If the “Setup” dialog is not displayed, select “My
Computer” (Windows XP) or “Computer” (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
“OLYMPUS Setup” window and then double-click
“Launcher.exe”.
If a “User Account Control” dialog is displayed, click
“Yes” or “Continue”.
2
Register your Olympus product.
● Click the “Registration” button and follow the on-
screen instructions.
The camera must be connected to the computer for
user registration. “Connecting the camera” (p. 12)
If nothing is displayed on the camera screen even after
connecting the camera to the computer, the battery
may be exhausted. Leave the camera connected
to the computer until the battery has charged, then
disconnect and reconnect the camera.
3
Install OLYMPUS Viewer 2 and [ib] computer
software.
● Check the system requirements before beginning
installation.
● Click the “OLYMPUS Viewer 2” or “OLYMPUS ib”
button and follow the on-screen instructions to
install the software.
OLYMPUS Viewer 2
Operating
System
Windows XP (Service Pack 2 or later) /
Windows Vista / Windows 7
Processor
Pentium 4 1.3 GHz or better
(Core2Duo 2.13GHz or better required
for movies)
RAM
1 GB or more
(2 GB or more recommended)
Free Hard
Drive Space
1 GB or more
Monitor
Settings
1024 x 768 pixels or more
Minimum 65,536 colors
(16,770,000 colors recommended)