Olympus SZ-31MR iHS - Manual (Page 41)

41 EN
For information on using the menus, see “Setup menu” (p. 8).
Viewing the image immediately after Viewing the image immediately after
shooting [Rec View]
shooting [Rec View]
z (Camera Menu 2) X Rec View
Submenu 2 Application
Off
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
On
The image being recorded is displayed.
This allows the user to make a brief
check of the image that was just taken.
Automatically rotating images shot with Automatically rotating images shot with
the camera in a vertical position during
the camera in a vertical position during
playback [Pic Orientation]
playback [Pic Orientation]
z (Camera Menu 2) X Pic Orientation
During shooting, the [y] (p. 45) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
Submenu 2 Application
Off
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
On
Information about the vertical/
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.
Displaying icon guides [Icon Guide] Displaying icon guides [Icon Guide]
z (Camera Menu 2) X Icon Guide
Submenu 2 Application
Off No icon guide is displayed.
On
The explanation of the selected icon
will be displayed when a shooting
mode or function menu icon is
selected (position the cursor on
the icon for a while to display the
explanation).
Icon guide
The camera will automatically
set the ISO sensitivity for
optimal image quality.
0.0 0.0
MENU MENU
16 M
ISO Auto
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
3200
ISO ISO
200
ISO ISO
200 100
ISO ISO
100 3200
Imprinting the date of recording Imprinting the date of recording
[Date Stamp]
[Date Stamp]
z (Camera Menu 2) X Date Stamp
Submenu 2 Application
Off Do not imprint the date.
On
Stamp new photographs with the
date of recording.
When the date and time are not set, [Date Stamp]
cannot be set.
“Language, date, time, and time zone” (p. 15)
The date stamp can not be deleted.
[Date Stamp] is not available in [Panorama] or [3D
Photo] mode.
Date stamps are not added in sequential shooting.