Selecting the focusing area [af mode, Recording sound when shooting still images [ r – Olympus STYLUS TOUGH-8000 User Manual

Page 32

Advertising
background image

32 EN

Selecting the range for measuring the
brightness [ESP/
n]

B CAMERA MENU X ESP/n

:

K

s A

Submenu 2

Application

ESP

Shoots to obtain a balanced
brightness over the entire screen.
(Meters the brightness at the
center and surrounding areas of
the screen separately.)

n (spot)

Shoots the subject at the center
during backlighting.

When set to [ESP], the center may

appear dark when shooting against strong
backlighting.

Selecting the focusing area [AF MODE]

B CAMERA MENU X AF MODE

:

K

s

Submenu 2

Application

FACE DETECT

*1

This is used for taking pictures of
people. (The camera automatically
detects a face and displays a
frame on the monitor). Press the
shutter button halfway, when the
camera focuses on a face the AF
target mark lights green. When the
AF target mark lights orange, this
indicates the camera has focused
on something other than a face.

iESP

This enables you to compose the
shot without worrying about the
focusing position. The camera
fi nds the subject to focus on and
automatically adjusts the focus.

SPOT

The camera focuses on the
subject within the AF target mark.

*1

For some subjects, the frame may not appear or

may take some time to appear.

Recording sound when shooting still
images [

R]

B CAMERA MENU X R

:

K

s

Submenu 2

Application

OFF

No sound is recorded.

ON

The camera automatically starts
recording for approx. 4 seconds
after taking the picture. This is
useful for recording notes or
comments about the picture.

When recording, aim the microphone (p. 6)

at the source of the sound you want to
record.

Reducing the blur caused by the
camera shake when shooting
[IMAGE STABILIZER] (still images) /
[DIS MOVIE MODE] (movies)

B CAMERA MENU X IMAGE STABILIZER /
DIS MOVIE MODE

:

K

s b A

Submenu 2

Application

OFF

The image stabilizer is deactivated.
This is recommended for shooting
when the camera is fi xed in place
on a tripod or other stable surface.

ON

The image stabilizer is activated.

The camera’s default settings are [IMAGE

STABILIZER] (still images) to [ON] and [DIS
MOVIE MODE] (movies) to [OFF].

While [IMAGE STABILIZER] (still images)

is set to [ON], noises may occur from the
inside of the camera if the shutter button is
pressed.

Images may not be stabilized if camera

shake is too severe.

When the shutter speed is extremely slow,

such as when taking still shots or taking
pictures at night, the stabilizer may not be
as effective.

When shooting while the [DIS MOVIE

MODE] (movies) is set to [ON], the image
will be enlarged somewhat before saving.

Advertising