40 en rotating images [ y, Adding sound to still images [ r, Erasing images [ k erase – Olympus STYLUS TOUGH-8000 User Manual

Page 40

Advertising
background image

40 EN

Rotating images [y]

J PLAYBACK MENU X y

Submenu 2

Application

U +90°

The image is rotated 90°
clockwise.

V 0°

The image is not rotated.

t –90°

The image is rotated 90°
counter-clockwise.

1

Use GH to select an image.

2

Use EF to select the rotation direction.

3

If necessary, repeat Steps 1 and 2

to adjust settings for other images, and
press the

o button.

The new picture orientation will be saved

even after the power is turned off.

Adding sound to still images [R]

J PLAYBACK MENU X R

Submenu 2

Application

YES

The camera adds (records) sound
for approx. 4 seconds while
playing back the image. This
is useful for recording notes or
comments about the image.

NO

No sound is recorded.

1

Use GH to select an image.

2

Aim the microphone towards the sound

source.

Microphone

3

Use EF to select [YES], and press the

o button.

Recording starts.

Erasing images [K ERASE]

K ERASE

Check each picture before erasing to avoid

erasing any important pictures you may
want to keep.

Submenu 1

Application

SEL. IMAGE

Images are individually selected
and erased.

ALL ERASE

All images in the internal memory
or card are erased.

When erasing pictures in the internal

memory, do not insert the card into the
camera.

When erasing pictures from the card, insert

a card into the camera in advance.

To individually select and erase
images [SEL. IMAGE]

1

Use EF to select [SEL. IMAGE], and

press the

o button.

2

Use EFGH to select the image to be

erased, and press the

o button to add a

R mark to the image.

1

4

2

5

3

6

IN

OK

MENU

BACK

SEL. IMAGE

D

GO

R mark

3

Repeat Step 2 to select the images to be

erased, and then press the

D button to

erase the selected images.

4

Use EF to select [YES], and press the

o button.

The images with a R mark are erased.

To erase all images [ALL ERASE]

1

Use EF to select [ALL ERASE], and

press the

o button.

2

Use EF to select [YES], and press the

o button.

Advertising