Olympus C-750 Ultra Zoom - Manual (Page 92)

91
Sequential shooting
Ad
va
nce
d
sho
o
tin
g
5
2
Select the exposure differential.
Press
ac to select ±0.3, ±0.7 or
±1.0, then press d.
3
Select the number of shots. Press ac to select ×3 or ×5,
then press e.
• Press e repeatedly until the menu disappears.
4
Take the picture.
• Press the shutter button fully and keep it pressed to shoot the preset
number of pictures. You can stop shooting at any time by releasing the
shutter button.
• Auto bracketing is not possible in M mode.
• Sequential shooting (j, i, k, BKT) is not possible in the
following situations:
– When the TIFF or SHQ record mode is set to ENLARGE SIZE
– When NOISE REDUCTION is set to ON.
• The built-in flash and external flash do not fire in BKT mode.
• If there is not enough space available on the card for the number of
frames you have set during auto bracketing, you cannot continue
shooting.
• If the battery power is low and the battery check blinks during
sequential shooting, shooting stops and the camera starts saving
the pictures you have taken. Whether or not all of the shots are
saved depends on how much battery power remains.
• Since the shutter speed is set to max. 1/30 sec., exposure is
decreased when shooting a dark subject.
• To use the external flash during sequential shooting, set the external
flash so that it fires for each frame.
BKt
GO SELECt CANCEL
Note