Olympus VG-130 - Manual (Page 40)

40 EN
For information on using the menus, see “Using the Menu” (p. 4).
3 Repeat Step 2 to select the images to be erased,
and then press the
m button to erase the selected
images.
4 Use FG to select [Yes], and press the Q button.
The images with a R mark are erased.
Saving print settings to the image data Saving print settings to the image data
[Print Order]
[Print Order]
q (Playback menu) X Print Order
“Print Reservations (DPOF)” (p. 51)
Print reservation can be set only for still images that
are recorded to the card.
Protecting images [ Protecting images [ ? ?]]
q (Playback menu) X ?
Protected images cannot be erased by [Erase] (p. 24,
39), [Sel. Image], or [All Erase] (p. 39), but all images
are erased by [Memory Format]/[Format] (p. 41).
1 Use HI to select an image.
2 Press the Q button.
Press the
Q button again to cancel the settings.
3 If necessary, repeat Steps 1 and 2 to protect other
images, and press the
m button.
●
●
Rotating images [ Rotating images [y
y]]
q (Playback menu) X y
1 Use HI to select an image.
2 Press the Q button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make settings
for other images, and press the
m button.
The new picture orientations will be saved even after
the power is turned off.