55 en, Error message, Miscellaneous – Olympus VG-130 User Manual

Page 55

Advertising
background image

55

EN

Miscellaneous

Miscellaneous

“The camera makes a noise when taking pictures”.

The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.

Error message

When one of the messages below is displayed on the

monitor, check the corrective action.

Error message

Corrective action

Card Error

Card problem
Insert a new card.

Write Protect

Card problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.

Memory Full

Internal memory problem

Insert a card.
Erase unwanted images.

*1


Card Full

Card problem

Replace the card.
Erase unwanted images.

*1


Card Setup

OK

Set

Format

Power Off

Power Off

Card problem
Use

FG to select [Format], and

press the

Q button. Next, use

FG to select [Yes], and press the

Q button.

*2

Memory Setup

OK

Memory Format

Set

Power Off

Power Off

Internal memory problem
Use

FG to select [Memory

Format], and press the

Q button.

Next, use

FG to select [Yes], and

press the

Q button.

*2

Error message

Corrective action

No Picture

Internal memory/Card problem
Take pictures before viewing them.

Picture Error

Problem with selected image
Use photo retouch software, etc.
to view the image on a computer.
If the image still cannot be viewed,
the image fi le is corrupted.

The Image Cannot

Be Edited

Problem with selected image
Use photo retouch software, etc. to
edit the image on a computer.

Battery Empty

Battery problem
Charge the battery.

No Connection

Connection problem
Connect the camera and computer
or printer correctly.

No Paper

Printer problem
Load paper into the printer.

No Ink

Printer problem
Refi ll the ink in the printer.

Jammed

Printer problem
Remove the jammed paper.

Settings

Changed

*3

Printer problem
Return to the status where the
printer can be used.

Print Error

Printer problem
Turn off the camera and printer,
check the printer for any problems,
and then turn the power on again.

Advertising
This manual is related to the following products: