Taking pictures without the flash, The picture is too grainy, Taking pictures with the correct color – Olympus Stylus 810 User Manual

Page 63

Advertising
background image

63

Gett

ing
to

kn
ow yo

ur ca

mera

bet
te

r

5

The flash fires automatically when there is insufficient light. If the subject is too
far away, the flash may have no effect. Here is how to take pictures without the
flash in this type of situation.
Set the camera to

h mode

• Because the sensitivity of the CCD increases automatically, you can hold the

camera and take pictures in darker places with the flash off.

g “Shooting with digital image stabilization mode” (P. 13)

Increase the [ISO] setting

• Increase the value of the [ISO] setting.

g “ISO Changing the ISO sensitivity” (P. 21)

There are several factors that can cause the picture to appear grainy.
Using the digital zoom to take close-up pictures

• With the digital zoom, part of the image is cropped and enlarged. The greater

the magnification, the grainier the picture appears.

g “DIGITAL ZOOM Zooming in on your subject” (P. 22)

Increasing the ISO sensitivity

• When you increase the [ISO] setting, “noise”, which appears as spots of

unwanted color or unevenness in the color, can be introduced and give the
picture a grainy appearance. This camera is equipped with a function to allow
shooting at high sensitivity while suppressing noise; however, increasing the
ISO sensitivity creates grainier pictures than when using a lower sensitivity.

g “ISO Changing the ISO sensitivity” (P. 21)

• The reason why there are differences between the colors in a picture and the

actual colors taken and the actual color is the light source illuminating the
subject. [WB] is the function that allows the camera to determine the correct
colors. Normally, the [AUTO] setting provides the optimal white balance, but
depending on the subject, it may be better to experiment with changing the
[WB] setting.

• When the subject is in the shade on a sunny day
• When the subject is illuminated by both natural light and indoor lighting,

such as when near a window

• When there is no white in the center of the frame

g “WB Adjusting the color of a picture” (P. 21)

Taking pictures without the flash

The picture is too grainy

Taking pictures with the correct color

Advertising