Olympus PT-030 - Manual (Page 19)

E-18
3. Install the digital camera.
Check the digital camera.
Check the digital camera before loading it in the Case.
Battery Confirmation
Confirm that the remaining battery capacity is sufficient.
Confirmation of the Remaining Number of Pictures to be Taken
Confirm that the image storage has a sufficient remaining number
of pictures to be taken.
Remove the hand strap from the digital camera.
If a hand strap is attached to the digital camera, it must be
removed.
Note: • To avoid missing shutter chances due the battery running out,
you should always replace the battery with a fully charged
battery before each dive.
: • If the digital camera is loaded without removing the
strap, the strap may prevent the Case from closing
properly, resulting in leakage.
• When removing the strap, handle the digital camera
carefully. OLYMPUS IMAGING CORP. is not
responsible for any damage caused by dropping or
otherwise mishandling the camera.
CAUTION
Prepare the camera
Check the operation of the camera.
Confirm the operation according to the instruction manual for the
digital camera.
Which digital cameras can be loaded?
This product (PT-030) is designed exclusively for use with the SP-310
and SP-350.
PT_030_EN.qxd 05.10.28 6:34 PM ページE-18