Olympus SP-510 UZ - Manual (Page 71)

EN
71
Ge
tti
n
g
to know you
r cam
er
a
bet
ter
This card cannot be used in
this camera. Or, the card is
not formatted.
Format or replace the card.
• Select [POWER OFF] and press o.
Insert a new card.
• Select [FORMAT] [YES] and press o.
All data on the card is erased.
There is an error in the
internal memory.
Select [MEMORY FORMAT] [YES] and
press o. All data in the internal memory is
erased.
NO CONNECTION
The camera is not connected
to the printer correctly.
Disconnect the camera and connect it again
correctly.
NO PAPER
There is no paper in the
printer.
Load some paper in the printer.
NO INK
The printer has run out of ink. Replace the ink cartridge in the printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS
CHANGED
The printer’s paper tray has
been removed or the printer
has been operated while
changing settings on the
camera.
Do not operate the printer while changing
settings on the camera.
PRINT ERROR
There is a problem with the
printer and/or camera.
Turn off the camera and printer. Check the
printer and remedy any problems before
turning the power on again.
r
CANNOT PRINT
Pictures recorded on other
cameras may not be printed
on this camera.
Use a computer to print.
Monitor indication Possible cause Corrective action
OK SET
C A R D S E T U P
POWER OFF
FORMAT
[ x D ]
OK SET
M E M O RY S E T U P
POWER OFF
MEMORY FORMAT
[ I N ]