Olympus PT-020 - Manual (Page 5)

E-8 E-7
Lifting the mode dial knob ……………………………………E-21
Fitting the mode dial knob ……………………………………E-21
Check the loading status. ……………………………………… E-22
Seal the Case. ……………………………………………………E-22
Install the special balance weight. ………………………………E-23
Installation and Removal of the LCD Hood ……………………E-23
Installation ………………………………………………………E-23
Removal …………………………………………………………E-23
Mounting and Removing the Lens Cap …………………………E-24
Perform the final checks. ……………………………………… E-24
Visual Inspection ………………………………………………E-24
Setting the camera power to ON and OFF. …………………E-24
Try to move the mode dial. …………………………………… E-24
Final Test …………………………………………………………E-25
4. Taking Pictures Under Water ………………………… E-26
How to Use the Hand Strap ……………………………………E-26
Take pictures carefully. ………………………………………… E-26
Confirm the picture on the LCD monitor. ……………………E-26
Quietly press the shutter lever. ……………………………… E-26
Cautions when using the flash ………………………………E-26
5. Handling After Shooting ……………………………… E-27
Wipe off any waterdrop. …………………………………………E-27
Take out the digital camera. …………………………………… E-28
Wash the Case with pure water. ……………………………… E-29
Dry the Case. …………………………………………………… E-29
6. Maintaining the Waterproof Function …………… E-30
Remove the O-ring. ………………………………………………E-30
Remove any sand, dirt, etc. …………………………………… E-30
Install the O-ring. ………………………………………………… E-31
How to Apply Grease to the O-ring ……………………………E-31
Replace consumable products. ………………………………… E-32
7. Appendix ……………………………………………………… E-33
Q & A on the use of the PT-020 …………………………………E-33
After-sale Service …………………………………………………E-38
Specifications ……………………………………………………E-39
Disclaimer ……………………………………………………………E-1
Please read the following before using the product ……………E-1
For safe use …………………………………………………………E-1
Batteries ……………………………………………………………E-3
For Prevention of Water Leakage Accidents ……………………E-4
Handling the Product ………………………………………………E-5
Contents ………………………………………………………… E-7-8
1. Preparations ………………………………………………… E-9
Check the contents of the package. ………………………………E-9
Names of the parts ……………………………………………E-10
Install the strap. ……………………………………………… E-11
Master the basic operation. …………………………………… E-11
Holding the Case ………………………………………………E-11
How to Press the Shutter ………………………………………E-12
How to Use the Mode Dial ……………………………………E-12
How to Use the Zoom Lever …………………………………E-12
Setting the Zoom Lever ………………………………………E-13
Power Switch Lever Operation Method ………………………E-13
Removing/attaching the standard port ………………………E-14
Removing the TTL cable connector cap ……………………E-15
Removing the hot shoe cable cap ……………………………E-16
2. Advance Check of the Case ………………………… E-17
Advance test before use …………………………………………E-17
Making sure the case is waterproof …………………………E-17
Advance Test ……………………………………………………E-18
3. Install the digital camera. ………………………………E-19
Check the digital camera. ……………………………………… E-19
Battery Confirmation ……………………………………………E-19
Confirmation of the Remaining Number of Pictures to be Taken ……E-19
Removing the carrying strap and lens cap from the digital camera …E-19
Removing the filter from the digital camera …………………………E-19
Loading in the Case ………………………………………………E-20
Which digital cameras can be loaded? ……………………… E-20
Check the operation of the camera. ………………………… E-20
Open the Case. ………………………………………………… E-20
Load the digital camera. ……………………………………… E-20
Insertion of silica gel ……………………………………………E-21
Contents
PT_020JE_E-四.qxd 2003.11.27 17:07 ページ E-7 (1,1)