Olympus D-360L - Manual (Page 58)

The Spot metering mode is used to obtain the right exposure regardless
of the backlight. Place the subject in the center of the autofocus marks.
Open the lens barrier and
press the Menu button several
times to display the screen
shown.
Select SPOT using the +/–
buttons, then press the OK
button to save the setting.
• appears on the control
panel.
• If the Menu button is pressed
while the setting is being
entered, it will be canceled and
the next setting menu will
appear.
Take a picture.
3
2
1
58
SPOT METERING MODE
HQ
Control panel
Note:
• The setting will remain if HOLD is selected in Setting Reset, but will be
canceled when the batteries are taken out. (p. 70)
1 2
SET OK
ESP
SPOT
NEXT
LCD monitor